SE210
The 21-tonne standard
Fits a standard low-bed without abnormal permits, matches a 10 m³ tipper on cycle, and does everything from trenching to loading.
Power
121 kW
Weight
21.2 t
Bucket
1.0 m³
SE Series · Hydraulic excavators
Excavators that hold their cycle
Bucket fill, swing speed and hydraulic recovery decide whether an excavator makes money. The SE range uses flow-sharing hydraulics and heavy-duty structures to hold cycle times deep into a 12-hour shift, from a 6-tonne compact in a township trench to a 50-tonne mass excavator on a pit face.
0
Models available
0-50 t
Operating weight
0-270 kW
Rated power
3.0 m³
Max bucket
Flow-sharing hydraulics
What you actually feel
Power where the operator puts it
A flow-sharing main valve means a simultaneous boom-up and swing does not starve either function. Operators notice it in the first hour; accountants notice it in the monthly production report.
- Three working modes. Power, Standard and Economy, switchable on the fly to match the material.
- Auto idle and auto shutdown. Cuts idle burn, which on most SA sites is 25-35% of engine hours.
- Reinforced structures. Thicker boom and arm plate, cast pivot points and HD track frames as standard.
- Serviceable filtration. Ground-level access, dual-stage air cleaning and 500-hour hydraulic return filters.
- Cooled for Africa. High-ambient radiator package rated for sustained 50 °C operation.
The line-up
SE-series excavator models
Indicative specifications. Bucket sizes shown are general-purpose; rock and mass-excavation buckets differ.
| Model | Rated power | Operating weight | Bucket | Typical application | Enquire |
|---|---|---|---|---|---|
| SE60 | 36 kW / 48 hp | 6.0 t | 0.21 m³ | Township services, landscaping, plumbing | SE60 quote |
| SE75 | 44 kW / 59 hp | 7.6 t | 0.30 m³ | Municipal trenching, small civils | SE75 quote |
| SE135 | 72 kW / 97 hp | 13.5 t | 0.53 m³ | Site works, pipe laying, tight sites | SE135 quote |
| SE210 | 121 kW / 162 hp | 21.2 t | 1.00 m³ | General civils, bulk trenching, loading | SE210 quote |
| SE245LC | 129 kW / 173 hp | 24.8 t | 1.20 m³ | Quarry, heavier loading duty | SE245LC quote |
| SE330LC | 186 kW / 249 hp | 33.5 t | 1.60 m³ | Mass excavation, mining support | SE330LC quote |
| SE370LC | 202 kW / 271 hp | 37.2 t | 1.90 m³ | Opencast loading, overburden | SE370LC quote |
| SE500LC | 270 kW / 362 hp | 49.8 t | 3.00 m³ | High-production pit face loading | SE500LC quote |
SE370LC
The pit loader
Rock-spec boom and arm, HD undercarriage, full belly and cab guarding. Built to feed a rigid hauler all shift.
Power
202 kW
Weight
37.2 t
Bucket
1.9 m³
SE60
The tight-site tool
Six tonnes, towable on a plant trailer, reduced tail swing. The workhorse of municipal services and plumbing contractors.
Power
36 kW
Weight
6.0 t
Bucket
0.21 m³
Configurations
One base machine, many jobs
Long reach
Extended boom and arm for canal work, dam cleaning, slope trimming and river rehabilitation.
Breaker ready
Single- and double-acting auxiliary circuits with pressure and flow set to your hammer on commissioning.
Rock & demolition
Reinforced fronts, FOPS cab guarding, belly plates and hardened GET for high-abrasion applications.
Quick couplers
Hydraulic and mechanical couplers so one machine runs buckets, grabs, shears and compaction plates.
ShanCare telematics on every machine
Location, fuel burn, idle percentage, working hours and active fault codes, visible to you and to our service desk. When a fault code trips on a Sunday night we can often tell you what is wrong before the operator has climbed down.
Need a machine on site this month?
Stock excavators in Johannesburg can be delivered anywhere in South Africa in three to seven working days, commissioned, inducted and working.